Afficher un message
Vieux 23/06/2009, 13h29   #8 (permalink)
Claude
Contributeur
 
Date d'inscription: mars 2003
Localisation: Sherbrooke
Messages: 2 176
Pouvoir de réputation: 9
Reputation: 75 Claude will become famous soon enough
Par défaut

Citation:
Envoyé par milago Voir le message
Pris sur un autre forum:

"Try this. get some zip ties and push the brake pedal down as far as you can and then use the zip ties to zip it down. Leave it like that over night (24 hours). then cut the zip ties and try your pedal then. I recently swaped all my lines to SS lines and had really bad squeshy brakes. I found this tip on the board and did it to the front and rear and it cleared the problem up. The theory is that it forces all the teeny tiny lil air bubles that are in the fluid back up the lines to the master cylinder."


Je vais essayer ça, ça à l'air de bien marcher (plutôt que de dépenser 40$ dans un vaccuum... j'suis grateux). Merci pour vos réponses, je vous tiens au courant.
Je fais toujours ça après avoir saigné mes freins (avant). J'utilise du tape pour mettre les freins avant et laisse ça toue une nuit. À chaque fois, la poignée devient dure (si bien saigné au départ, bien sûr...).
Claude est déconnecté   Réponse avec citation